| Customization: | Available |
|---|---|
| Type: | Insulated |
| Conductor Type: | Stranded |
Suppliers with verified business licenses
Ceramics silicon rubber resistant cable is widely used in television stations, hospitals, theaters, commercial buildings, subways.tunnels, railways, airports, railway stations, large public sports, entertainment,supermarkets, hotels, high-rise buildings, *** facilities.nuclear power, coal, chemical, pharmaceutical, steel, metallurgy, shipbuilding, civil and so on. Ceramic silicon rubberisa new type ofpolymer composite materials, that can fire at 750ºC x 90min ablative case, not the ashes of burnt powder, can be shaped into ceramicarmor, the formation of a layerof hard protective layer, which is the normal rubber, plastics and other polymer materials can not beachieved, and thus does not short-circuit protection circuit, open circuit.
Q/WHY53
1. Rated voltage UyU should be 0.6/1ky:
2. Maximum operating temperature of cable conductor should be 180ºC
3.Conductor D.C,resistance at 20ºC should comply with GB/T3956;
4. Ambient temperature when cable laid should be not less than -25'ºC, and mimimum bending radius should be not less than 10times ofthe cable outer diameter;
5.Withstand frequency voltage test 3,5kV for 5 minutes without puncture.
| Type | Description |
| TCNH-YGG | Copper core ceramic silicon rubber insulated and sheathed fre resistant power cable |
| TCNH-YGGR | Copper core ceramic silicone rubber insulated and sheathed fre resistant flexible power cable |
Note :The type not listed in the table should be comprised according to following type explanation.
1. Conductor D.C.resistance at 20ºC should comply with GB/T3956.
2. Insulation nominal thickness should meet the following table requirements.
3. Finished cable should withstand A.C. voltage 3.0kV test for 5 minutes without puneture.
| Type | Cores No. | Nominal Cross Section mm2. |
| TCNH-YGG TCNH-YGLG TCNH-YGGR TCNH-YGLGR |
1 | 1.5~630 |
| 2 | 1.5~185 | |
| 3 | 1.5~300 | |
| 4 | 1.5~185 | |
| 3+1 | 4~300 | |
| 5 | 1.5~185 | |
| 3+2 | 4~185 | |
| 4+1 | 4~185 |
1. Conductor D.C.resistance at 20ºC complies with stipulations of GB/T3956.
2. Insulation resistance constant should be not less than 1500MΩ.km.
3. 450/750V fnished cable should withstand A.C. 2.5kV for 5 minutes without puncture.
){kind=link}